Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Roseville?
Gate access control in Roseville typically costs $450-$1,900 for a single entry keypad and receiver upgrade, $1,200-$3,800 for a full telephone entry or card-reader system on an existing gate, and $3,500-$9,000 when a new automated gate and its access hardware are installed together. Repairing an existing entry device – a keypad, card reader, loop detector or control board – usually runs $180-$650. The written estimate always sets the final price, and estimates are free.
If your gate has stopped opening for fobs, codes or cards, the fix isn’t always the device itself. It could be the receiver, the control board, a wiring fault, or the operator’s safety loop. Access control pricing depends on which of those is actually failing, which is why a brand-specific diagnosis comes before any quote.
Key Takeaways
- Repairing an existing access device: $180-$650 typical.
- New keypad and receiver on an existing operator: $450-$1,900.
- Telephone entry, intercom or card-reader system: $1,200-$3,800.
- New automated gate plus access control, installed together: $3,500-$9,000.
- We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Access Control Cost Breakdown (2026)
Access control isn’t one product – it’s several parts that work together: the entry device (keypad, card reader or telephone entry), the receiver, the control board, the safety loops, and the operator that moves the gate. Pricing breaks along those lines.
| Work item | Typical Roseville range (2026) |
|---|---|
| Keypad repair or replacement (wired or wireless) | $180-$520 |
| New wired keypad and receiver on an existing operator | $450-$1,200 |
| Card reader or proximity reader (single entry point) | $650-$1,400 |
| Telephone entry or intercom system | $1,200-$3,800 |
| Control board replacement | $380-$950 |
| Safety loop detector (diagnose and replace) | $350-$900 |
| Receiver replacement or re-pairing | $150-$420 |
| Wiring repair from house or pedestal to gate | $280-$1,200 |
| New swing gate operator with access control | $3,500-$7,500 |
| New slide gate operator with access control | $4,500-$9,000 |
What drives the range: the type of entry device (a basic keypad sits at the low end; telephone entry and multi-reader systems at the high end), the condition of the wiring that has to reach the gate, and whether the operator itself is healthy. A failing control board can make a perfectly good keypad look broken, and a damaged receiver can make a card reader look faulty. Brand-specific diagnosis is what turns an open-ended “it depends” estimate into a firm number.
Our technicians have up to 15 years of experience on gate systems and the access hardware that runs them. Every job we price starts with identifying the actual failure so the estimate covers what needs replacing and nothing else.
What Affects Gate Access Control Pricing in Roseville
Two houses on the same Roseville street can get very different quotes for what sounds like the same job. Here’s why:
- Wiring distance and condition. A gate 20 feet from the house is a quick wire run. A gate at the end of a long driveway with buried conduit needs more labor and possibly conduit repair. Older runs that have taken on moisture or been nicked by yard equipment add hours.
- Entry device type. A standalone keypad is the simplest access control. Telephone entry and card-reader systems involve a live phone line or network connection, a directory, and often a keypad plus a reader. Each layer adds parts and time.
- Operator age and brand. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Operator boards from older systems sometimes don’t have a compatible input for a new receiver, and that shapes the quote. Sometimes a small adapter solves it; sometimes the board needs replacing first.
- Number of entry points. A single driveway gate with one keypad is straightforward. A commercial property with a main entrance, a service entrance and a pedestrian gate needs coordinated readers, which changes the scope substantially.
- HOA or commercial requirements. HOA boards in Roseville often want a specific directory function, a call button, or a visitor code system. Those requirements push pricing toward the telephone-entry end of the table. Commercial properties may need gate logs or reader compatibility with an existing access management system.
- Gate condition. If the gate sags, binds, or drags on the ground, access control upgrades won’t fix the real problem. We identify mechanical issues during the estimate so a new keypad isn’t installed on a gate that will keep failing.
Roseville’s mild winters work in your favor here. Gate access hardware, wiring runs and pedestal-mounted readers aren’t subject to hard freeze damage or heavy snow loads, so the wear we see is mostly mechanical (hinges, rollers, bolts) and electrical (moisture at connectors, corroded terminals, aging boards) rather than seasonal damage. That keeps most repair bills in the middle of the ranges above rather than pushing them toward the top.
How to Save on Gate Access Control
Most of the savings on a gate access control job come from getting the diagnosis right the first time and choosing the simplest system that actually meets your needs. A few practical tips:
- Diagnose before replacing. The most common expensive mistake we see is replacing a working keypad when the actual failure is a receiver, a control board or a loop. A proper diagnosis costs a visit; replacing the wrong part costs a repair plus the visit.
- Match the system to the property. A single-family home with a driveway gate almost never needs telephone entry. A wireless keypad and receiver at the low end of the table handles most residential needs. Save the reader and intercom budget for HOA and commercial jobs that genuinely require multiple access methods.
- Fix the gate’s mechanical issues at the same time. If the gate sags or drags, any access control you add will keep getting blamed for the failure. Addressing the hinge, roller or track during the same visit saves a second trip later.
- Check existing wiring first. If the conduit and conductors from the house to the gate are sound, there’s often no reason to re-run. Asking us to inspect the existing run during the estimate can save several hundred dollars.
- Get a written estimate before any work. Every quote we give is free and in writing, and the written estimate sets the price. No surprises at the end.
If you’re comparing quotes, ask each contractor to write down what they’ll replace and why. That’s how you tell a firm estimate from a guess. Our brand-neutral approach means we’re not steering you toward a specific manufacturer for convenience – the right fix for the system you already have is what we quote.
Can You Repair Access Control the Same Day in Roseville?
Often, yes. Many access control problems – a keypad that’s stopped responding, a receiver that’s lost its pairing, a control board that needs resetting – get diagnosed and repaired in a single visit when we have the right parts on hand. Call (855) 431-0356. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Complex jobs (telephone entry with a full directory rebuild, multi-reader commercial systems, or wiring repair under a long driveway) usually take a scheduled visit or two. We’ll tell you which category your job falls into during the first phone call.
What’s the Difference Between Gate Repair and Electric Gate Repair?
Gate repair is the mechanical side: hinges, rollers, latches, posts, and the gate’s structure. Electric gate repair is the electrical and control side: the operator motor, control board, receiver, wiring, and access devices. Access control pricing usually lands under the electric gate repair category, since keypads, readers, receivers and intercoms are electrical components connected to the operator. If the gate’s mechanical issues are also in play – and they often are – that’s priced separately. We cover both under one trade, so there’s no handoff from a gate company to a general electrical contractor. That’s the full gate lifecycle from control board to concrete post.
For a full overview of what we handle day to day, see gate repair Roseville, or read more about service in Roseville.
How Much Does Keypad Replacement Cost in Roseville?
Replacing a standalone keypad in Roseville typically costs $180-$520, including the new keypad and pairing it with your existing operator. If the receiver also needs replacing, add roughly $150-$420. Wired keypads tend toward the lower end of that range; wireless and surface-mount pedestal keypads run higher because of the install time. Call (855) 431-0356 for a free estimate on your specific gate.
How Much Does a Card Reader System Cost in Roseville?
A single card or proximity reader added to an existing gate typically costs $650-$1,400 installed. Multi-reader systems on a commercial property are priced per entry point and often land between $1,200 and $2,400 per reader once you include the reader itself, cabling and control board work. Telephone entry systems with a card reader built in run $1,200-$3,800. Call (855) 431-0356 for a free estimate.
Is It Cheaper to Repair or Replace a Gate Access System?
Repair is almost always cheaper in the short term. A $180-$650 repair on a working system beats a $1,200-$3,800 replacement every time, unless the underlying operator or control board is already at end of life. Replacement makes sense when the operator board is obsolete, the wiring has failed in multiple places, or the entry device can no longer be paired with the current operator. We’ll tell you which side you’re on during the estimate rather than defaulting to replacement. Call (855) 431-0356 for a free estimate.
How Much Does a New Automated Gate with Access Control Cost in Roseville?
A new automated swing gate installed together with access control typically costs $3,500-$7,500, and a new slide gate runs $4,500-$9,000. Those ranges include the operator, the gate hardware, and a keypad or receiver. Adding card readers or telephone entry pushes the total higher. On complex installs the number can go up further. Call (855) 431-0356 for a free estimate – the written quote sets the final price.
FAQs – Gate Access Control Cost
How much does gate access control cost in Roseville?
Gate access control in Roseville typically costs $450-$1,900 for a new keypad and receiver, $1,200-$3,800 for a full telephone entry or card-reader system, and $3,500-$9,000 for a new automated gate installed with access hardware. Repairs to existing devices usually run $180-$650. Call (855) 431-0356 for a free estimate – the written quote sets the price.
Can you come today for a gate access control problem?
Often, yes. Many access control failures – a dead keypad, an unpaired receiver, a stuck control board – can be diagnosed and repaired in a single visit. Call (855) 431-0356. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll tell you on the call whether we can get to you the same day.
Why won’t my keypad open the gate?
The cause is usually one of four things: a dead battery in a wireless keypad, a lost pairing between keypad and receiver, a failed receiver, or a control board that’s no longer accepting the signal. A proper diagnosis typically costs $180-$650 to fix once we find the failure. Call (855) 431-0356 for a free estimate.
Do you work on my brand of gate operator?
Yes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We diagnose by brand-specific logic rather than guesswork, and we’re not pushing any proprietary system – the right fix for your existing equipment is the goal. Call (855) 431-0356 for a free estimate.
Do you offer free estimates on gate access control?
Yes. Every gate access control estimate we give is free and in writing. The written estimate sets the final price, so there’s no surprise on the invoice. Call (855) 431-0356. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is gate access control a DIY job?
Not safely, and we don’t recommend it. Access control involves live electrical wiring, control board work that can short an operator, and gate systems with heavy panels that can crush if a limit or safety device is misconfigured. The dangerous parts here are the operator’s wiring and power, the moving panel itself, and slide gates that can come off the track. A trained gate technician should handle installation and repair.
Will a new keypad fix the problem if the receiver is failing?
No. If the receiver is failing, a new keypad won’t fix anything. The keypad transmits; the receiver receives. Replacing one when the other is failing is the most common way homeowners spend twice on the same problem. A proper diagnosis saves the wasted part. Call (855) 431-0356 for a free estimate that starts with the diagnosis, not the guess.
Call for a Free Gate Access Control Estimate in Roseville
Whether the gate won’t open for a fob, a card reader has stopped reading, or you’re pricing a new automated entry system for an HOA or commercial property, the fastest path to a firm number is a call. Gate access control is a trade-specific job, and the diagnosis is the part that drives the price. We’ll identify the actual failure, quote the work in writing, and set the price from that estimate. Electric or manual, we diagnose it right.
Call (855) 431-0356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the price is set per job by the written estimate, and our technicians have up to 15 years of experience on gate systems and the access hardware that runs them.
Pricing reflects the Roseville market as of 2026. Gate Repair Roseville offers free estimates – call (855) 431-0356.
Written by the team at Gate Repair Roseville.
What Our Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Javier Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Claudia Reyes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Kevin Sutton