Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Loomis
If your driveway gate is stuck open, dragging on the ground, or the operator just clicks and won’t run, we can help. We’re a gate specialist serving Loomis, and we handle manual and electric gates from the hinge to the control board. Our technicians have up to 15 years of experience, and we work on the brands that show up on Loomis properties, from older ranch equipment to newer estate systems. Call (855) 431-0356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Loomis Homeowners Call Gate Repair Roseville for Gate Repair
Loomis is a town of long driveways. Many properties sit on multi-acre parcels, and a lot of those driveways run far past the meter, which means the power side of a gate problem matters as much as the mechanical side. We know that. When we come out, we check the operator’s power source and the gate’s mechanics in the same visit, because on a rural lot those two things fail together.
We’re a gate specialist, not a generalist. Every tool we carry and every skill our technicians build is around gates, from wrought iron leaves to wide steel farm gates. That focus shows up in how we diagnose. We don’t guess at a Linear or DoorKing control board, and we don’t push you toward a brand you don’t already own. We fix the system that’s on your property.
Our technicians have up to 15 years of experience across residential and commercial gate systems in the area. If you’re in Loomis and your gate has stopped working reliably, call (855) 431-0356. The estimate is free and the price is set in writing before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Loomis
Wrought Iron Gate Repair in Loomis usually means dealing with a heavy ornamental leaf that’s lost its swing or its alignment. Iron gates on estate lots and custom homes in Loomis are built to last, but hinges wear, posts shift in the ground, and the leaf starts to bind. When a gate drags or won’t latch, the leaf is often the symptom and the post is the cause. We check the footing and the hinge side first, then correct the alignment before touching the gate itself.
Typical wrought iron work in Loomis runs $200 to $650 for hinge, alignment, and latch repairs. Full leaf repairs or weld work on a bent frame run higher, and we set that price in writing after we look at the gate. If the iron is rusted through at a stress point, we’ll tell you that plainly.
Hinge and Post Adjustment
A wrought iron gate that scrapes the ground is usually sitting on a hinge post that has settled. Winter rains swell the soil around a post footing, and on a long rural driveway that movement shows up as sag and drag. We reset and re-hang the leaf at the hinge side rather than shimming the gate.
Weld and Rust Repair
Rust at a weld joint on an iron gate weakens the whole leaf. Weld repair and rust treatment get the frame sound again before we realign anything. If the metal has thinned too far at a joint, we’ll say so and talk through options.
Metal Gate Repair in Loomis
Metal Gate Repair in Loomis leans heavily on wide steel pipe gates and heavy driveway gates. Livestock and trucks bend these on a regular basis, and a bent leaf throws the geometry off, which then binds the operator’s rack and pinion. We straighten and re-hang the gate so it swings true, and then we retest the operator against a gate that actually runs free.
Typical metal gate repair in Loomis runs $150 to $500 for straightening, hinge work, and realignment. Heavier farm gate repairs, including post work on a bent or shifted post, run $300 to $800. We quote it in writing before work starts so there are no surprises when the gate is done.
Bent Leaf Straightening
A steel gate bent by a truck or a horse can often be straightened and re-hung rather than replaced. Straightening is worked cold or with controlled heat depending on the frame. The goal is a leaf that runs true in the track or on the arm.
Farm Gate Hardware
Wide steel farm gates run on heavy hinges and latches that take a beating. Worn hinge pins and bent latches are common on livestock properties. We replace the hardware and re-level the leaf so it stays put.
Trusted Brands We Service in Loomis
We work on your brand. Our technicians are familiar with Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule, and we diagnose each by its own logic rather than guessing. That matters on the power side, where a stalled operator can come down to battery condition, a receiver, or a control board. We don’t stock parts on a truck, so we identify what’s wrong first and then get the right part for your system. That keeps turnaround quick without pushing you toward a brand for convenience. The right fix for your existing system is always the goal.
Common Gate Repair Problems We See in Loomis Homes
A lot of what we see in Loomis comes back to the same conditions: hot summers, wet winters, and long driveways.
- Hinge-post movement after winter rains. Winter rain swells the ground around a post footing and shifts it, so a heavy gate starts sagging and dragging. On a long rural driveway, that sag is usually the first thing to show up in spring.
- Solar opener batteries failing after hot summers. Loomis summers push past 100°F, and solar gate opener batteries and panels underperform in that heat. An operator that stalls mid-travel often has a power problem, not a mechanical one.
- Livestock and truck strikes bending wide steel gates. A bent steel pipe gate thrown out of plane will bind the operator’s rack and pinion. The gate looks fine at a glance, but it no longer runs true.
- Wooden gates drying and warping in summer heat. Wood gates on Loomis properties dry out and warp through a hot summer, so a gate that latched fine in spring starts to bind by August. That warping is a seasonal issue on this town’s lots.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Loomis, CA
A typical gate repair in Loomis runs $150 to $500, depending on what’s wrong and how heavy the gate is. Wrought iron alignment and hinge work usually falls in the $200 to $650 range. Metal farm gate repairs, including post work, run $300 to $800. Electric and automatic gate repair, including control board, receiver, or motor work, runs $250 to $900, and the power side on a solar system gets checked as part of that same visit. These are typical ranges for the local market. The written estimate sets the final price, and we quote it before any work starts. Call (855) 431-0356 for a free estimate.
We Also Serve Cities Near Loomis
We cover gate repair across the surrounding area, including Rocklin, Roseville, Auburn Lake Trails, and Antelope. If you’re just outside Loomis, call and we’ll confirm coverage. Our gate repair service handles manual and electric systems, repair through installation. Call (855) 431-0356 for a free estimate.
Serving Loomis, CA – Our Local Coverage Area
We serve Loomis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Loomis
It’s usually the power side first, especially on a long rural driveway. Loomis summers push past 100°F, and solar opener batteries and panels underperform in that heat, so an operator stalls mid-travel even when the gate itself swings freely. We check battery and panel condition alongside the mechanics in the same visit so we’re not fixing half the problem. Call (855) 431-0356 for a free estimate.
Winter rain swells the ground around the hinge post and shifts the footing, so a heavy gate sags and drags. On a long driveway the post carries more load, which makes the movement show up faster. The fix is at the hinge post rather than the panel: we check the footing, correct the sag, then re-level the gate and re-test the operator. Call (855) 431-0356.
Most bent steel gates can be repaired and re-hung rather than replaced. Straightening brings the leaf back into plane so the operator’s rack and pinion no longer binds. If the frame is cracked or the metal has thinned too far, we’ll say so and walk you through the options before any work. Call (855) 431-0356 for a free estimate.
An automatic gate needs working entrapment protection, typically safety photocells and, where the gate type calls for it, safety edges, so the gate reverses rather than closing on a person, pet, or vehicle. On a rural Loomis driveway with livestock and kids around, that protection matters more than on a small yard gate. If the gate has none or it isn’t working, have it checked before the operator is used again. Call (855) 431-0356.
Yes. We work on Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule, which covers a lot of the older ranch equipment and the newer estate systems showing up around Loomis. We diagnose the brand you already have and get the right fix for it rather than pushing a replacement. Call (855) 431-0356 for a free estimate.
Call for Gate Repair in Loomis
Whether your gate is a wide steel farm gate on a long driveway or a newer automatic driveway gate on an estate lot, we diagnose it right and quote the price in writing before any work starts. Call (855) 431-0356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Roseville.