Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Loomis
If your electric gate stopped opening, is running in fits and starts, or has quit reversing the way it used to, we can help. We’re a gate-specialist company serving Loomis and the surrounding foothill towns, and electric gate repair is our core discipline, not something we tack onto other work. We know the driveways here: long rural approaches off Taylor Road, estate lots near the Loomis Basin, older parcels with pasture fencing running to the property line. Old gate or new, the diagnosis starts the same way. Call (855) 431-0356 and we’ll get the details. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Loomis Homeowners Call Gate Repair Roseville for Electric Gate Repair
Loomis is a small town, and people here tend to notice who actually understands a gate and who’s guessing. Our technicians work on the specific brands that show up on Loomis properties, so when a Linear or Viking operator acts up, they’re reading the symptom through that system’s logic instead of poking at it blind.
Response time to Loomis is quick, because we’re nearby and the route is straightforward. When a gate fails, the property is exposed, and we treat that seriously. We quote the price and get your agreement before any work starts, so there’s no surprise on the invoice.
Our technicians have up to 15 years of experience, and electric gate repair is a primary specialty. Wiring, control boards, receivers, and motor assemblies are routine work here, not jobs we escalate to someone else. That focus is the reason homeowners, HOA managers, and commercial property owners around town call us back.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in Loomis
Automatic Gate Repair in Loomis often starts with something older than the gate itself: an operator control board that predates current safety standards. Many properties here still run gate operators installed before UL 325 entrapment rules existed, and those boards fail in a specific way once modern safety accessories are added. So the first step on a repair call is always testing entrapment protection, not just replacing whatever part looks bad. A typical automatic gate repair in Loomis runs about $250 to $950 depending on what’s failed, and we set the exact price in a written estimate before we start.
Safety Photo-Eye Retrofits
Retrofitting safety photo-eyes is often step one before any mechanical repair on an older operator. When the entrapment protection isn’t working, fixing the motor first just means the gate moves again with the same hazard in place. We test the eyes, correct the wiring, and make sure the gate reverses the way it should before anything else.
When the Control Board Has to Go
Obsolete boards on pre-UL 325 operators can fail when you add modern safety accessories, and no amount of resetting brings them back. When that happens, we tell you plainly whether the board can be replaced or whether the operator has reached the end of its useful life. Sometimes the honest answer is replacement, and we’ll say so.
Electric Gate Motor in Loomis
An Electric Gate Motor in Loomis carries a lot of load on properties with wide, heavy driveways, and it’s usually the operator that shows the strain first. On a long rural approach, the gate can be heavy and far from the power source, and a hinge post that has shifted in the clay soil throws the panel out of alignment and overloads the motor. A motor repair or replacement typically runs $350 to $1,200, and a written estimate sets the final figure.
Post Footings and Gate Alignment
When a swing gate sags after winter rain, the post footing gets checked before the motor does. Ground movement from winter soil swell throws the panel out of level, and the operator burns out trying to push a misaligned gate. Correcting the footing and re-leveling the gate first saves the motor from an early failure.
Diagnosing Erratic Cycling
A gate that stops and starts on its own or won’t reverse after a winter of ground movement usually has a misaligned safety photocell or a board fouled by dust and heat. We test the entrapment protection, check the receiver, and trace the fault to the actual component. Repairs get done right the first time, not re-guessed.
Trusted Brands We Service in Loomis
We work on the operator brands that show up most on Loomis properties, including Linear, Viking, and Ghost Controls, along with the rest of the nine major brands we cover. Our technicians diagnose by brand-specific logic, so a Linear operator gets a Linear diagnosis. We don’t stock parts, but we source what the job needs and keep turnaround fast. The goal is always the right fix for your existing system, not a push toward whichever brand is easiest for us. Call (855) 431-0356 for a free estimate.
Common Electric Gate Repair Problems We See in Loomis Homes
- Obsolete control boards in pre-UL 325 operators. Many Loomis gate systems run control boards that predate entrapment-protection rules, and those boards fail when modern safety accessories are added. We test entrapment protection first and tell you whether a retrofit is realistic or replacement wins out.
- Hinge post movement from winter soil swell. Loomis winter rains swell the clay ground and shift fence posts, throwing swing gates out of alignment. A misaligned gate overloads the operator, so correcting the footing often saves the motor.
- Livestock or truck damage to heavy steel farm gates. Properties with working pastures and long driveways see ranch gates bent by horses or trucks, and a bent frame overloads the operator. We straighten what we can and quote honestly when the frame is too far gone.
- Dust and summer heat fouling electronics. Loomis summers run past 100°F, and heat plus dust fouls receivers and control boards, causing erratic cycling. Wooden gate panels warp in that same dry heat, pulling the latching hardware out of line.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Loomis, CA
Here’s what electric gate repair typically costs in Loomis. Safety photo-eye retrofits generally run $150 to $450. Control board replacement lands around $250 to $700, and a full motor or operator replacement runs $350 to $1,200. A post-footing correction and gate realignment, the work that often comes before any electronic repair, typically runs $200 to $600. What moves the price is the operator’s age, whether the failed part is still available, and how much post and hinge work the gate needs underneath. The written estimate sets the final price, and it’s free. Call (855) 431-0356 for an exact quote.
We Also Serve Cities Near Loomis
Gate repair in Loomis runs alongside our work in the surrounding foothill and valley towns. If you’re in Rocklin, Roseville, Auburn Lake Trails, or Antelope, our electric gate repair team covers those areas as well. Same approach, same brand-neutral diagnosis, same honest estimate. Call (855) 431-0356 to book a free estimate.
Serving Loomis, CA – Our Local Coverage Area
We serve Loomis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Loomis
Often yes, but it depends on the board. Many pre-UL 325 LiftMaster operators accept safety photo-eyes as an add-on, though some older boards fail once modern accessories are wired in. We test the entrapment protection first and tell you honestly whether the retrofit works or the board needs replacing. Call (855) 431-0356 for a free estimate.
Usually not. A sag after winter rain is most often a shifted hinge post, not a failed gate panel, and correcting the footing and re-leveling the gate fixes it. The gate itself rarely needs replacing for sag alone. We check the post before quoting anything. Call (855) 431-0356 for an exact quote.
A reset sometimes clears a one-time glitch, but if the gate stops reversing or cycles on its own after a reset, the board is usually the culprit. Dust and heat common in Loomis summers foul control boards. We test the board and the safety accessories to confirm before replacing anything. Call (855) 431-0356 for a free estimate.
Linear and LiftMaster operators show up often on estate and rural gates around here, along with DoorKing on commercial and HOA systems. We service all of them plus the other major brands we cover, and we diagnose each on its own logic. Call (855) 431-0356 for an exact quote.
Sometimes, but it depends on how far the frame bent. A bent steel gate overloads the operator, and pushing it can burn out the motor. We check the frame and the operator together and tell you whether straightening the gate saves the motor or both need replacing. Call (855) 431-0356 for a free estimate.
Getting Your Loomis Gate Working Again
Whether you have an aging ranch gate with an obsolete operator or a newer estate gate that’s stopped reversing, the fix starts with a proper diagnosis. We test entrapment protection, check the post and alignment, and trace the fault to the real cause before quoting a repair. The price is set in a written estimate and agreed before any work starts. Call (855) 431-0356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Written by the team at Gate Repair Roseville.