Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Loomis, CA
If you’re putting in a new driveway gate on a Loomis property, the job is rarely a small one. Parcels here tend to run long and wide, the summers bake anything made of wood, and the winter rains move posts. That’s why a gate company in Loomis, CA should be a gate specialist, not a fencing contractor who takes a gate job now and then. We handle gate installation from the first measurement to the finished swing or slide, and we build the gate around your driveway, your power situation and the way you actually use the entrance. Call (855) 431-0356 for a free estimate. We answer 24/7.
Why Loomis Homes Are Different
Loomis is rural-residential first and suburban second, and gates show it. Many properties still have horse pastures, orchard remnants and long driveways set well back from the road, so the gates that matter here are wide, heavy-duty driveway and livestock gates rather than a decorative yard gate on a short path. You see the older ranch infrastructure alongside a wave of new estate subdivisions, which splits the market: aging manual gates on one side, modern automatic gates on the other.
Housing matches that split. Multi-acre parcels with older ranch-style homes sit next to large-lot custom homes and newer luxury estates, and each type asks something different of a gate. Then there’s the climate. Loomis runs hot-summer Mediterranean, and 100°F+ stretches dry out wooden gates and warp them. Winter rains swell the ground and shift fence posts, so gates sag and misalign between seasons. On long rural driveways, the power and wiring run to an automatic gate is often the trickiest part of a Loomis installation.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Loomis Services
The two jobs Loomis homeowners call about most are gate repair and electric gate repair. Both have their own dedicated pages, so here’s where each one starts.
Gate Repair in Loomis
Loomis keeps us busy with wide, heavy gates: steel farm entrances bent by livestock or a truck, driveway gates that have sagged as the ground swelled and shifted, and older wooden gates that warped through a hot summer. A repair visit starts with the gate itself – hinges, posts, frame, latches, track – before anything else is touched. We work on manual and electric gates, and we fix what’s there rather than selling you a replacement you don’t need. Details and pricing are on our page for gate repair in Loomis.
Electric Gate Repair in Loomis
Automated gates on long rural driveways bring their own problems, and most of them are electrical: a control board that’s failed, a receiver that stopped accepting remotes, a motor assembly that strains, or wiring that took on water or got chewed. On a Loomis property the power run is often long, which makes a proper diagnostic essential before anyone starts replacing parts. Electric gate repair is core work for us, not an escalation. The full breakdown is on our electric gate repair in Loomis page.
Gate Installation in Loomis
Gate installation in Loomis means matching a gate to a property that’s usually wider and more spread out than a typical suburban lot, and doing it in a climate that punishes wood in summer and moves posts in winter. We’ll handle the whole install as a proper project, from concrete posts to the operator, and we’re a gate specialist rather than a generalist contractor. You can see how our gate installation work is scoped before you call.
Automatic Gate Installation
Signs you need it
You want the entrance to open without leaving the vehicle, and the existing manual gate is too wide or too heavy to swing or slide by hand comfortably.
What it costs in Loomis
A new automatic driveway gate typically runs $3,500 to $9,000 installed, with operators on the upper end.
How we do it
We measure the opening, set posts to proper footing depth, hang or mount the gate leaf, then wire and configure the operator, safety edges and remotes, and test the full cycle before handing it over.
Driveway Gate Installation
Signs you need it
The driveway is long or open to the road and you need a clear physical boundary that holds up to daily vehicle traffic and weather.
What it costs in Loomis
A single swing driveway gate typically runs $1,800 to $4,500 installed, with double swing gates at $3,500 to $8,000.
How we do it
We lay out the gate line, dig and set the posts, build the frame and hang the leaf, then check clearances and swing or slide before the operator or latch goes on.
What Gate Installation Costs in Loomis
These are the typical ranges for Loomis properties. The written estimate sets the final price, and we quote it before any work starts.
| Item | Typical range in Loomis |
|---|---|
| Single swing driveway gate, installed | $1,800 – $4,500 |
| Double swing driveway gate, installed | $3,500 – $8,000 |
| Automatic driveway gate with operator, installed | $3,500 – $9,000 |
Can you install an automatic gate on a long rural driveway in Loomis?
Yes. Long rural driveways are common on Loomis properties, and the main consideration is the power and wiring run out to the gate. We work out the supply route and operator placement during the site visit, then quote it in writing.
Do I need a permit for a new gate in Loomis?
Most cities require a permit for a new gate or a change to a driveway entrance, so check with the Town of Loomis building department before work begins. We plan the install around whatever the permit and any HOA rules require. Call (855) 431-0356 for a free estimate.
Brands We Service in Loomis
We work on your brand, not just the ones we’d like to sell. That includes Linear, Viking, Ghost Controls and DoorKing operators, along with the other major manufacturers on our brands list. We don’t claim to stock parts locally for every system, but our technicians diagnose by brand-specific logic, so turnaround stays predictable. Our technicians have up to 15 years of experience.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Loomis, CA
Every figure below is typical, not fixed. We quote yours in writing first.
| Service | Typical range in Loomis |
|---|---|
| Manual gate repair (realign, hinges, latch) | $150 – $450 |
| Gate post resetting and concrete work | $250 – $750 |
| Sliding gate track or roller repair | $200 – $600 |
| Operator control board replacement | $350 – $900 |
| Operator motor or actuator replacement | $450 – $1,200 |
| Receiver, remote and keypad setup | $150 – $400 |
| Electric gate wiring or power run repair | $300 – $1,000 |
| Single swing driveway gate, installed | $1,800 – $4,500 |
| Double swing driveway gate, installed | $3,500 – $8,000 |
| Automatic driveway gate with operator, installed | $3,500 – $9,000 |
Two things push price up in Loomis: the sheer width and weight of rural driveway and livestock gates, and the length of the power and wiring run to an operator on a long driveway. We give you an upfront price agreed before any work starts, so the invoice matches the quote.
Neighborhoods We Serve in Loomis
We cover the whole Loomis area, from the older ranch parcels around 95650 out to the newer estate subdivisions where automatic gates are going in on large custom lots. Whether your entrance is a wide manual farm gate or a fresh install on a long private drive, we can get a technician out. Fast dispatch, 7am-7pm, Sunday through Friday.
- Rural parcels around the 95650 area
- Large-lot custom homes
- New estate subdivisions
- Horse pasture and orchard properties
- Long-driveway properties off the main roads
Service Area – Cities Near Loomis
Loomis sits between Roseville and Auburn, and our gate work reaches the neighboring communities as well. If you’re just outside Loomis, we can still get to you. We cover Rocklin, CA, Roseville, CA, Auburn Lake Trails, CA and Antelope, CA, along with the surrounding Placer County area. Call (855) 431-0356 to confirm coverage for your address and get a free estimate.
Serving Loomis, CA – Our Local Coverage Area
We serve Loomis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Loomis
For repair calls we run same-day service where the schedule allows, and our phone line is answered 24/7. For new gate installation, the work is measured and scheduled rather than same-day. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 431-0356 for a free estimate.
Check with the Town of Loomis about permits for a new gate or driveway entrance change, and check any HOA rules if your property sits in one of the newer subdivisions. We plan the install around what those require.
Yes. We cover Loomis itself and the neighboring cities, including Rocklin, Roseville, Auburn Lake Trails and Antelope. Whether you’re on a rural parcel or in a new estate development, call (855) 431-0356 and we’ll confirm timing for your address.
Call (855) 431-0356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Loomis Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Javier Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Claudia Reyes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Kevin Sutton